Maximum 500 NANO SINGLE Installationsanleitung Seite 13

Upper Window
The upper window lists all the remote PLC-Ethernet Bridge devices found
in the current logical Powerline networks. This window displays information
such as Device Name, MAC Address, Device Password, and Speed (Mbps)
for the remote devices.
The "Name" column shows the nickname of each remote device inside the
Powerline network. The default name is "Remote". You can change it by
clicking the item first, and then click the "Set Name" button. It will pop-up
"Set Name" dialog box as shown in Figure 2. You can input the new name
for the device.
Figure 2: Set Name Dialog
The "MAC Address" column shows remote device's MAC address.
The "Password" column shows remote device's password. You can input
the password by clicking the "Enter Password" button.
The "Speed (Mbps)" column shows the remote device's mutual transmit
speed with the local device, in Mbps (Million bits per second).
"Enter Password" button
If you want to create a private network, you need to enter the remote de-
vice's password first. Please click on the intended device to make it high
13
English