Control Terminals - GE AF-60 LP Micro Drive Kurzanleitung

1.1.14 Control Terminals

All control cable terminals are located underneath the terminal cover in
front of the frequency converter. Remove the terminal cover using a screw-
driver.
NB!
See back of terminal cover for outlines of control terminals and switches.
The illustration below shows all control terminals of the frequency converter. Applying Start (term. 18) and an analog reference (term. 53 or 60) make the fre-
quency converter run.
Illustration 1.4: Overview of control terminals in PNP-configuration and factory setting.
Illustration 1.3: Removing terminal cover.
DEH-41264A
AF-60 LP Micro Drive
1
7