GE AF-60 LP Micro Drive Kurzanleitung Seite 20

Max. voltage
Current level
Input resistance, R
i
Max. current
Analog output:
Number of programmable analog outputs
Terminal number
Current range at analog output
Max. load to common at analog output
Max. voltage at analog output
Accuracy on analog output
Resolution on analog output
Control card, RS-485 serial communication:
Terminal number
Terminal number 61
Control card, 24 V DC output:
Terminal number
Max. load (M1 and M2)
Max. load (M3)
Max. load (M4 and M5)
Relay output:
Programmable relay output
Relay 01 Terminal number
1)
Max. terminal load (AC-1) on 01-02 (NO) (Resistive load)
Max. terminal load (AC-15) 1) on 01-02 (NO) (Inductive load @ cos 0.4)
Max. terminal load (DC-1) 1) on 01-02 (NO) (Resistive load)
1)
Max. terminal load (DC-13) on 01-02 (NO) (Inductive load)
1)
Max. terminal load (AC-1) on 01-03 (NC) (Resistive load)
Max. terminal load (AC-15) 1) on 01-03 (NC) (Inductive load @ cos 0.4)
Max. terminal load (DC-1) 1) on 01-03 (NC) (Resistive load)
Min. terminal load on 01-03 (NC), 01-02 (NO)
Environment according to EN 60664-1
1) IEC 60947 part 4 and 5
Control card, 10 V DC output:
Terminal number
Output voltage
Max. load
NB!
All inputs, outputs, circuits, DC supplies and relay contacts are galvanically isolated from the supply voltage (PELV) and other high-voltage terminals.
DEH-41264A
AF-60 LP Micro Drive
20 V
0/4 to 20 mA (scaleable)
approx. 200
30 mA
0/4 - 20 mA
500
17 V
Max. error: 0.8 % of full scale
8 bit
68 (P,TX+, RX+), 69 (N,TX-, RX-)
Common for terminals 68 and 69
160 mA
30 mA
200 mA
01-03 (break), 01-02(make)
250 V AC, 2 A
250 V AC, 0.2 A
30 V DC, 2 A
24 V DC, 0.1A
250 V AC, 2 A
250 V AC, 0.2A
30 V DC, 2 A
24 V DC 10 mA, 24 V AC 20 mA
overvoltage category III/pollution degree 2
10.5 V ±0.5 V
25 mA
1
1
42
12
1
50
19