Werbung
Verfügbare Sprachen
Verfügbare Sprachen
- 18 -
8.
Installation under Windows 2000, Windows XP
8.1. General Information
Windows 2000/XP has a built-in standardised SCSI interface that allows you to
adapt your specific hardware to the different SCSI hostadapters. Hardware adaptation
is done by driver "DC2980.SYS" located in the "\WIN2000" directory on your installation
diskette. The file "DC2980.INF" (also stored in the "\WIN2000" directory) controls the
Windows 2000/XP Installer.
The device drivers required for running CD-ROM or removable disk drives etc.
are part of the Windows 2000/XP operating system providing an automatic setup
procedure which much facilitates the installation process. Windows 2000/XP
recognizes your SCSI hostadapter automatically and installs a suitable standard
Windows driver. To install the delivered driver or a current one from the Internet, open
the symbol "System" in the control panel (XP:switch to "classic view") and choose the
category "Hardware".
Then click the "Device Manager" and choose the SCSI hostadapter under the
section SCSI and RAID controller. Choose "Driver Update" under the catagory
"Drivers". The assistent
starts to update the
device drivers. Please
follow the instructions
on the screen. The
necessary files for the
installation are located
in the "\WIN2000"
directory
of
your
installation diskette.
After
you
have
determined
the
corresponding drive
and directory, a window
with the exact model
description of your SCSI
hostadapter appears.
PCI SCSI hostadapters are automatically configured by the PCI BIOS, i.e. the
SCSI hostadapter is assigned a free interrupt and a free I/O address which cannot
be changed via Windows' Device Manager.
After PC restart the SCSI hostadapter and all SCSI devices connected to it will
be listed in Windows' Device Manager.
Quick Guide
Werbung
