Rothenberger ROCAM 4 Plus Bedienungsanleitung Seite 8

b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any
adjustments, changing accessories, or
storing power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tools operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and tool
bits etc., in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5) Service
Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
6
Special Safety instructions
Risk of electrical shock and energy hazard. All
failure should be examined by a qualified
technician. Please do not remove the case of the
adaptor by yourself.
Risk of fire or electrical shock. The openings
should be protected from foreign objects or
dripping liquids.
Using wrong DC plug or forcing a DC plug into an
electronic device may damage the device or
cause to malfunction. Please refer to DC plug
compatibility information shown in specification
sheets.
Adaptors should be placed on a reliable surface.
A drop or fall could cause damage.
Please do not put adaptors in places with high
moisture or near the water.
Please do not put adaptors in places with high
ambient temperature or near fire source. About
the maximum ambient temperature, please refer
to their specifications.
Output current and output wattage must not
exceed the rated values on specifications.
Disconnect the unit from the AC power before
cleaning. Do not use any liquid or aerosol
cleaner. Only use a damp cloth to wipe it.
Battery Adapter use only in the ROCAM 4 Plus!
Other applications are not permitted!!
ENGLISH