Babboe BIG Montageanleitung Seite 11

Installing the safety belts
1. Start with the belt, easy-lock and buckles. First put the belt through one opening in
the easy-lock. Then insert the belt through the two locking clips.
2. Next, pull both sides of the belt through a loose buckle. Now insert the two ends of
the belt through the two openings on the easy-lock clasp and then again through
the two buckles.
3. The belt with the clips is now complete. Now take the easy-lock and insert it
through the hole in the base of the Toddler Seat.
4. Pull the belt straps through the openings from the back towards the front. You can
choose either the high or low opening depending on the size of your child. Fasten
the clasps into the easy-lock.