Preparation Before Installation - Babboe BIG Montageanleitung

UK - Installation instructions
In the packaging you will find the following components:
• The Babboe Toddler Seat
• Bag of accessories: buckles (2x), bolts with screws (2x), Velcro strip (1x), easy-
lock clasps (2x), locking clips (2x), the safety belt and the easy-lock.
Other required items: a wood drill of 6mm diameter.

Preparation before installation

1. Remove the supplied safety belts from the position where the Toddler Seat will be
installed. Babboe advises that you install the Toddler Seat on the handlebar side,
as this is where the highest panels are located.
2. For optimal placement inside the container of the cargo bike, drill a hole (6 mm
diameter) in the back support (handlebar side).
The exact position varies per type of Babboe cargo bike:
Babboe BIG:
Around 7 cm from the top edge and
14 cm from the side (measured on the
inside).
Babboe CURVE and Babboe CITY:
Exactly in the middle between the two
existing holes for the seat belt. You
could also use one of these holes,
but then the Toddler Seat will not sit
directly to one side of the seat.