Kimo Instruments Si-C320 Schnellstartanleitung Seite 17

7. 首次开机
Welcome
Model: XXXXX - S/N: XXXXXX - Build: XXXXXXX - FMW:
Start Settings
XXXXX - Version: 5.02
点击"开始设置"
Tap ''Start settings''.
Western
Europe
France Belgium Netherlands Germany
Northern Southern Western
Austria Switzerland
Rest of Europe
Next
选择国家然后点击
选择您所在的地区
Tap your required
Tap your area.
"下一步"
country then ''Next''.
10:35 - 10/12/2021
Set your Time Zone
Select Date
DAY MONTH YEAR DAY
MONTH / DAY / YEAR • Los Angeles: -8 winter, -7 summer
• New York: -5 winter, -4 summer
/ / +1
11 11 01 2021 • London: +0 winter, +1 summer
DAY / MONTH / YEAR • Paris: +1 winter, +2 summer
• Dubai: +4 • Beijing: +8 • Tokyo: +9
• Sydney: +10 winter, +11 summer
Next Next
选择日期然后点击 选择时区然后点击
Set the date and tap ''Next''. Set your time zone and tap
"下一步" "下一步"
''Next''.
对于无显示屏的型号,请使用移动应用
App设置变送器。
8. 连接或断开探头
将探头连接到 Si-C320 变送器
b
a
CLICK
断开 Si-C320 变送器连接的探头
a
c
Languages
Skip
English French Spanish Italian
German Portuguese Chinese
Next
选择语言然后点击
Select your language
"下一步"
and tap ''Next''.
Select Continent
Africa Europe North America LATAM
Middle East
APAC
选择您所在的大洲
Tap your continent.
10:35 - 10/12/2021
Set your time
MINUTES DAY MINUTES
24 hours
: 0
+1 : 0 0
AM PM
Next
选择时间然后点击
Set your time and
"下一步"
tap ''Next''.
10:35 - 10/12/2021
Channel Con guration
Please connect the probe(s)
before con guring the
channel(s)
Next
设置完成。
The transmitter is set. You can
然后连接探头并设置通道。
connect a probe to set a channel.
• 将探头接口(a)按照左图箭头
方向连接到变送器接口(b)。
• 用力向上推,当听到"咔"的一
声则安装正确。
• 向左旋转探头(图c位置)。
• 将探头(a)拉出变送器接口
(b)。
b
9. 设置通道
10:35 - 10/12/2021
10:35 - 10/12/2021
Channel Con guration Select Channel
Channel 1
Please connect the probe(s)
Channel 2
before con guring the
channel(s) Channel 3
Channel 4
Next Next
连接探头然后点击"下一步" 显示可用通道列表, 选择想要
Connect a probe to set a The list of available channel is
设置的通道。
channel and tap ''Next''. displayed.
Tap the required channel.
10:35 - 10/12/2021
Select Channel
Channel 1
Channel 2
Channel 3
Channel 4
Next Next
通道 1 设置完成点击下一步
Channel 2 is con gured. Tap
设置输出。
next to con gure outputs.
对于无显示屏的型号,请使用移动应用App设置通道。
10. 设置输出
Activate the channel taping .
''Measures'', ''Units'', ''Coef cient'' and
''Offset'' are now available.
10:35 - 10/12/2021 10:35 - 10/12/2021
Select Analog Output Output 2
Output 1
Output type
Output 2 High Range (%RH)
Output 3 Low Range (%RH)
Output 4 Diagnostic
Next
点击右边标记
点击输出设置与先前配置的
Activate the output taping
Tap the output to set corres-
激活输出功能。 设置输出种类
通道相对应的输出。
Set the output type and high
ponding to the previously
和高低报警值。 点击左上角箭
and low range values then tap
con gured channel.
头返回。
the back arrow on the top left.
对于无显示屏的型号,请使用移动应用App设置输出。
11. 维修保养
请避免使用刺激性溶剂或使用含有甲醛(福尔马林)成分的清洁剂清洁变送器和探头。
Next
12. 使用注意事项
为了不损害设备的保护功能,请始终遵照仪器的用途在测量参数范围内使用。
10:35 - 10/12/2021
Channel 2
PROBE 1 PROBE 2 MODULE
SELECT UNIT
Measures
Units - - - -
1.000
Coef cient
0.00
Offset
选择"探头1", "探头2"
Tap ''PROBE 1'', ''PROBE
或"模块", 显示可设置
2'' or ''MODULE''.
的参数。
Parameters to set are now
available.
10:35 - 10/12/2021
Channel 2
PROBE 1 PROBE 2 MODULE
Rel. Humidity
Measures
%RH
Units
1.000
Coef cient
Offset 0.00
设置参数然后点击左上角箭
Set the parameters according
头返回。
to your needs then tap the
back arrow on the top left.
10:35 - 10/12/2021
Select Analog Output
10:35 - 10/12/2021
4-20 mA Output 1
Select Channels
98.0 Output 2
Channel 1
10.0
Output 3
Channel 2
Output 4
Channel 3
Next
Channel 4 点击下一步执行测量。
.
Tap ''Next'' to
Next
display measures.
10:35 - 10/12/2021
Measures
Channel 2 1
27.7
%RH