Migatronic OPERATOR M3.01 Betriebsanleitung Seite 5

SAFETY WARNINGS - READ BEFORE USING
• This hard hat is made to absorb the energy of a blow by partial destruction or damage to
the shell and the harness, if fitted, and even though such damage may not be readily
apparent, any hard hat subjected to severe impact should be replaced.
• The hard hat conforms to EN397-2012 standard.
• For adequate protection this hard hat must fit or be adjusted to the size of the user's head.
• The attention of users is also drawn to the danger of modifying or removing any of the
original component parts of the hard hat, other than as recommended by the hard hat
manufacturer. Hard hat should not be adapted for the purpose of fitting attachments in any
way not recommended by the hard hat manufacturer.
• Do not apply paint, solvents, adhesives or self-adhesive labels, except in accordance with
instructions from the hard hat manufacturer.
• This product is not suitable for protection against X-rays, Gamma rays, high energy
particulate radiation, lasers and masers.
• Please make sure that the protection film is removed before use.
• Inspect the hard hat before use to make sure it is fully assembled and well-functioned to
ensure safety.
• Check before use to determine whether this product is suitable for your application.
• Before using the hard hat, ensure that you have read and well understood the instructions.
• The Warranty Terms don't cover problems such as those caused by: unauthorized
modifications; using unauthorized spare parts; abuse; failure to follow the instructions;
improper maintenance; repairing.
• There are only original spare parts (See page 11) to be installed. For information about
suitable spare parts Please contact the dealer or manufacturer.
• The duration of use depends on various factors such as use, cleaning storage and
maintenance.
• Frequently inspections and replacement if the hat is damaged are recommended.
• Materials which may come into contact with the wearer's skin could cause allergic reactions
to susceptible individuals.
BEFORE AND AFTER USING THE HARD HAT CHECK THE
• Make sure there is sufficient ambient light.
• Replace worn or damaged parts immediately.
• Headgear must be adjusted to fit properly before use.
Read & Understand All Instructions Before Using
FOLLWING ITEMS:
5
EN