Step 1. Wear Insulating Gloves; Step 2. Check The Battery; Step 3. Plan A Mounting Site - Renogy Pro Benutzerhandbuch

Step 1. Wear Insulating Gloves

Step 2. Check the Battery

Inspect the battery for any visible damage including cracks, dents, deformation, and other visible
abnormalities. All connector contacts shall be clean and dry, free of dirt or corrosion.
Do not touch the exposed electrolytes or powder if the battery is damaged.
If any uncovered electrolyte or powder comes into contact with your skin or eyes, flush the area
immediately with plenty of clean water and seek medical attention.

Step 3. Plan a Mounting Site

For optimal battery performance, it is recommended to install the battery in a clean, cool, and dry
location, free from any accumulation of water, oil, or dirt. Accumulation of such materials on the
battery can lead to current leakage, self-discharge, and even short-circuiting.
cross-flow
Vent
Charge: -4°F to 131°F / -20°C to 55°C
Discharge: -4°F to 140°F / -20°C to 60°C
Vent
Air
Enclosed space
EN
— 08 —
Insulating
Gloves
1.97-3.94 in
Vent
≥ 7.87 in
(20 cm)
KEEP DRY
(5-10 cm)
5% to 95%
FRAGILE
VENTILATION
Vent