Timer And Changing The Message Display Language; Programmable Timer - Electrolux trilobite ZA2 Handbuch

Timer and Changing
the Message
Display Language
Normal. Timer: Auto
Select timer?
Timer
It is possible to set the time duration for
Normal or Quick vacuuming.
1. Select the desired vacuum program, or
press twice til "Select timer?" is shown.
Confirm by pressing
2. Set the desired time setting by pressing
and then confirm by pressing
When "Auto" is chosen Trilobite will
cal culate its own vacuuming time.
When "On" is chosen, use
desired time, confirm by pressing
When "Off" is chosen Trilobite will clean
until charging is needed.
For normal vacuuming program, this is the
vacuuming time after edge cleaning.
3. Press to commence vacuuming.
Language
Trilobite is able to present the information on
the display in a number of different languages.
1. To change the display language, switch
on Trilobite and press .
2. Press until the displays asks whether you
want to change the language. Press
3. Press to select the desired language and
confirm by pressing .
Trilobite will now show display messages in
the selected language.
Status Messages
When you select a function, a status mes-
sage is shown on the display for about seven
seconds. After this, the name of the function
is shown again. It is of course possible to
change or confirm a displayed function even
while the status message is shown.
12 English
ELX_Tril2_EngTyFra.indd 12 ELX_Tril2_EngTyFra.indd 12

Programmable Timer

Trilobite can be programmed to clean at a
particular time on every day of the week.
To use this function, you must first activate
and program Trilobite's day and time func-
tions. You can then set which day or days
. you want Trilobite to clean on. After pro-
gramming, it is a simple matter to activate or
.
deactivate the setting.
NOTE: Trilobite can only start program-
med cleaning if it is placed in the charging
to set
.
station.
Set clock
1. Start Trilobite.
2. Press
is displayed.
3. Press
4. "Set time" is displayed.
5. Press
6. "Set day" is displayed. Press
the desired day is displayed.
7. Press
8. "Set clock" is displayed.
.
9. Press
10. Press
11. Press
block is displayed.
12. Press
13. Press
is displayed.
14. Press
displayed.
Normal. Timer: Auto
Select start time?
until "Select start time"
.
.
until
.
until the desired hour is displayed.
.
until the desired 10-minute
.
until the desired minute
. The day and time are now
Normal. Timer: Auto
Select start time?
To program the cleaning time:
1. Start Trilobite.
2. Press until "Select start time"
is displayed.
3. Press .
4. "Timetab." is displayed. (If the clock is
not set, "Set time" is displayed. See
above on setting the time.)
5. Press .
6. "Select start day" is displayed.
7. Press until the desired day is displayed.
8. Press .
9. "Select start time" is displayed.
10. Press until the desired hour is displayed.
11. Press .
12. Press until the desired minute is
displayed.
13. Press . The desired start time and pro-
gram are displayed. The default set ting is
the normal program with automatic timer.
14. "OK?" flashes. If the setting is correct,
confirm with . "Start cleaning?"
is displayed. Proceed to step 22.
If you require a different cleaning program:
15. Press . "Select program?" flashes.
16. Press .
17. Press to select the desired program.
18. Press .
19. Select the desired cleaning time.
(See "Timer" on this page.)
20. The set program is displayed. "OK?"
flashes. Confirm with . "Start clean-
ing?" is displayed.
05-09-01 15.43.49 05-09-01 15.43.49