PinLED Display 20002 Einbauanleitung Seite 16

Installation guide for display 20002
support@pinled.de
PinLED
Pictures for installation
Installation in Bally/Williams pinballs
Example Bally/Williams Twilight Zone
Page 4
Put the speaker panel on the playfield
glass.
Put the new display into suitable posi‐
tion.
Fix the new display and reconnect the
flat cable.
With the aid of two cable clamps connect
the included power cable to 9VAC at the
red cables, which reach the board at J101
pin 1 and 2
Version 1.0
©2015 by PinLED