Installation guide for display 20002
Installation guide for the PinLED display set 20002
Read this installation guide completely before you start changing the display. Follow all
steps of this manual. Note the following safety instruction.
Danger, electrical hazard. High voltages are present in the pinball
machine during operation. The supply voltages of the displays and
coils are grater then 50V and dangerous to life. Please do all re‐
modeling while the pinball is turned off.
Please let a qualified person change the display only. The technician
should have experience in working on pinball machines. This in‐
cludes the reading and understanding of technical paper such as
schematics of pinball machines.
Unplug the mains plug to disconnect the pinball from the outlet.
Wait at lest 10 minutes to make sure that all capacitors of the power
supplies can discharge completely.
support@pinled.de
PinLED
(128x32 Dot‐matrix display)
Safety Instruction
UNPLUG THE MAINS PLUG
Delivery contain
Page 1
CAUTION
QUALIFIED PERSONAL
Version 1.0
• 128x32 Dot‐matrix
display
• Power supply wire
incl. power clamps.
• This manual.
©2015 by PinLED