VEVOR C30+ Benutzerhandbuch Seite 7

CAUTION: Do not push the adhesive when it is cold or the hot-melt time is
not sufficient, or else it can be damaged.
Keep the surroundings of the machine clean avoiding the impurity getting
into the adhesive can and causing damage.
Avoid touching the adhesive roller with the hard material which can
damage it.
Please turn off the switch and cut off the power when
the machine is not used.
1. Please check whether the cover pressing board suits the cover of the
documents to be made.
2. Put the right handle at position N
CAUTION:
1. Please ensure no impurities get into the adhesive, such as waste
paper, wood dust, steel pin, etc, or they can be jammed.
2. The folding line should be well folded to ensure the rectangular shape
of the spine. To buy a creasing machine is recommended.
3. The quantity of added adhesive should not overrun the position
pointed by the arrow in the can, or the adhesive will overflow.
OPERATIONS FOR MAKING THE SOFT COVER BOOK
1. Put down the handle of paper pressing clamp and undraw the clamp.
2. When the cover is prepared (a folded line is made manually or by a
creasing machine), put it between the paper pressing clamp and the
turning platform from below. Please ensure the cover close to the
6