VEVOR C30+ Benutzerhandbuch Seite 4

OPERATING INSTRUCTIONS
1. Temperature-controlling instrument: the temperature is arranged at
338℉ at the time of exfactory (using the hot melt glue provided by our
company); If hot melt glue of other style is adopted, the temperature can be
adjusted according to its melting point.
2. Operations of milling cutter: push the cutter to-and-fro, when the book
spine is well milled, brush the adhesive.
3. Hardcover hot groove-pressing device put the hard cover in the paper
pressing clamp tightly and press the right handle down to tighten the hard
cover for 5-10 seconds.
Attention: there is electricity-powered constant temperature device (50℃)
on the hardcover hot groove-pressing board; therefore, it should be
avoided from destruction or touched by hands. The small switch at the right
side can control whether the hardcover hot groove-pressing board is
connected with electricity, so that the user can choose hot-pressing or
cold-pressing
3