Wireless Connection; Description Of The Symbols; Connect With The App - Rollei Lux Compact 40W Rgb Bedienungsanleitung

Operation
28

4. Wireless Connection

Slide the switch to the "BT" position and hold for a few seconds until the
device enters pairing mode .
The APP icon on the screen will start flashing, indicating the device is ready to
pair (valid for 60 seconds) .
* A 4-character Device ID will appear when under pairing .

5. Description of the Symbols

App connection status symbol
App control mode: Available for control via the Candela/
Lux LED app .
Error symbol
NTC error (COB temperature sensor error): If this symbol
lights up, it indicates a problem with the temperature sensor
of the light . In this case, it is recommended that you contact
customer service immediately .
Fan error: If this symbol appears, there is a problem with the
fan . In this case, it is recommended that you contact customer
service immediately .
ENGLISH

Connect with the App

– Download the Candela/Lux LED app .
– Activate Bluetooth®* on your smartphone .
– Switch on the LUX LED light .
– Slide the switch to BT . The switch will spring back automatically . When the
APP icon appears on the screen, slide to BT again to activate Bluetooth®*
and start pairing mode (valid for 60 seconds) .
– Open the Candela/Lux LED app and create a new scene using the "+" .
29