Create CHEFBOT TOUCH Bedienungsanleitung Seite 15

CLEANING AND MAINTENANCE
• Please unplug the power cord before cleaning.
• Please use a dry dishcloth to clean the mair unit DOnot wash them with water or put it into the dishwasher.
• DC NOTwash the bowl into the dishwasher becausethe electrical conections on the basc will he damaged,
• t id. Measuringcup, Blade,Mixing paddle. Steambasket, Steamer.etc, all above photo eccessories can be washed
by dish-washing machine.
• Metalbrush, n ylonbrush, h ousehold cleaner, d iluent.cleaning productswilldamage thesurface cf product s tructure.
• Please use dry and soft cloth to clean pcwer cord.
Note: II you are having a problem with your appliances which cannot be solved using the measures above, please
call our helpline.
RESET FUSE
• Why does it qo Off? The fuse goes Off when the bottom Of the bowl is cverheetinq. This is a serious issue end
ycu should identify the cause to stop it from happening again. Make sure you fallow the instructions given in the
•usage limits and recommendations' paragraphthoroughly.
• Possiblecausesof overheating are: not usingthe mixing blade,heatingthe bowlwhile empty,or cookingfood
at an inappropriately high temperature and for too long, Never let food burn inside the bcwl. If the food starts
burning, lower the cooking temperature and add some water or fatty ingredient.
• Prior tc resetting the fuse: cool the bowl
• If there is a hot mixture inside, empty it into a separate bowl as vou will finish the cooking process later on. Pour
cold water into the bowl and let it rest for 5 to 10 minutes approximately. Do not put the bowl Inthe refrigerator,it
is dangerous (moisture) and much slower. Oncethe bowl has cooled down, empty it.
• To reset the fuse: use a ballpoint pen (ideally) or a small screwdriver. Do not use Sherpor pointy tools. Put the
bowlupsidedownandpressthetranslucentsiliconecomponent ( seetheblackcircleshownbythe pointeronthe
adjacent figure), With the tip of the ballpoint pen.
• Watchcarefully: resetting the fuse makesit click ard you should hear the sound:
• If it is thecase,youcankeepusingthebowl.Makesureyouusethemixingbladeproperlyandfollow the usage
recommendations to ensureyour product's functions on the long run.
• If you did not hear the fuse click and if the bowl still does not heat after trying severaltimes, something else is
stopping the bowl from
• If the fuse goes off too often, either the bowl or the fuse is faulty, or the bowl is not being used
appropriately.
• Impairing the fuse buttonto stop it from goirg off or to force it tc resetis prohibited.Doingsc
would create fire cr electric shock hazards,
in which case you should contact the customer service.
15
EN