RENPHO RF-FM062 Bedienungsanleitung Seite 5

FUNCTION
HEAT: Press to turn on/off the heating function
POWER: Press to turn on/off the massager
SPEED: Press to adjust rotation speed between low and high level
Removable mesh: Unzip to remove and clean; machine-washable
Adjustable stand: Adjusts the height and angle of the foot massager
OPERATION
1. Plug the device to the power source.
2. When the power indicator is red, it means the massager is in standby
mode and green when the massager is operating.
3. Press the "POWER" button to activate the massager. The first and the
third massage nodes on the left foot will rotate clockwise, while the
second massage node rotates counterclockwise. The respective
nodes will rotate in the opposite direction for the right foot.
4. Press the "HEAT" button to enable/disable the heating function.
5. Press the "SPEED" button to adjust the rotation speed. Flashing red
light indicates slow speed. Solid red light indicates fast speed.
6. The foot massager will automatically shut off after 15 minutes of
continuous use to avoid overheating.
7. To remove the cover, simply unzip. The cover is machine-washable.
8. For safety considerations, the motor will automatically shut off when
the temperature gets too high from long massage duration or heavy
load. Once the temperature cools down, the motor will then
automatically operate as usual.
Note: We recommend limiting usage to 30 minutes per session to avoid
mild pain or any discomfort.
EN-03