Cleaning And Maintenance - Tesla Ir200R Bedienungsanleitung

Self-Cleaning
Use the self-cleaning function once every two weeks. If the
water in your area is very hard(i.e, when flakes come out
of the soleplate during ironing),the self-cleaning function
should be used more frequently.). Make sure the appliance
is unplugged, set the steam selector to position "O", fill
the water tank to the MAX position, do not put vinegar or
other dealing agents in the water tank., select the maximum
ironing temperature, put the plug in the wall socket, unplug
the iron when the power indicator lighter has gone out,
hold the iron over the sink, press and hold the self-cleaning
button and gently shake the iron to and fro. Steam and
boiling water will come out of the soleplate, impurities and
flakes(if any),will be flushed out. Release the self-cleaning
button as soon as all the water in the tank has been used up.
Repeat the self-cleaning process if the iron still contains a lot
of impurities. After the self-cleaning process, put the plug in
the wall socket and let the iron heat up to allow the soleplate
to dry, unplug the iron when it has reached the set ironing
temperature, move the hot iron gently over a piece of used
cloth to remove any water stains that may have formed on
the soleplate, let the iron cool down before you store it.
Temperature and steam settings table
Instructions on Label

CLEANING AND MAINTENANCE

Before cleaning, remove the plug from the socket and allow the iron to cool down sufficiently.
1. Wipe off the soleplate with a damp cloth and a non-abrasive (liquid) cleaner.
2. If the fiber is adhered to the soleplate, use a damp cloth with vinegar to wipe off the soleplate.
3. Never use strong acid or alkali in order to avoid damaging the soleplate.
4. If the scale blocks the steam hole, please remove the scale with toothpick; do not damage the surface of soleplate.
5. Stand the iron on its end and let it cool down sufficiently, and meantime pour any remaining water out of the box, set
the steam knob to position "O".
Caution:
ANTI DRIP
1. Anti-drip system, which is designed to prevent water
escaping from the soleplate when the iron is too cold
automatically.
2. During use, the anti drip system may emit a loud clicking
sound, particularly during heat-up or whilst cooling down.
This is perfectly normal and indicates that the system is
functioning correctly.
ANTI SCALE
The build-in anti-scale cartridge is designed to reduce the
build-up of limescale which occurs during steam ironing.
This will prolong the working life of your iron. However,
please note that the anti-scale cartridge will not completely
stop the natural process of limescale build-up.
Indicates that the fabric is not ironing
Type of Fabric
Nylon
Silk
Wool
Cotton
Linen, jeans
Thermostat Dial
MIN
MAX
5