Checklist - Vogel's Rise 2000 Direct Control Produkthandbuch

RISE 2000 DIRECT CONROL MOTORIZED DISPLAY LIFT FLOOR-WALL SOLUTION:
Check whether the interface strips have been secured to the interface bar by fixing the screws from the
bottom.
Check whether maximum weight of the display (max. 100kg) and lift + peripherals (max. 140 kg)
is not exeeded.
Check whether maximum total weight of lift is 140kg.
Check whether maximum power of the display + peripherals does not exceed 900W.
Check whether the power cord has strain relief.
Check that all cables are neatly secured, concealed and do not come into contact
with sharp edges.
Check if the gyroscope is mounted correctly.
Check whether the plug is easily accessible.
Check that there are no obstacles in the movement area of the product (bottom + top).
Check whether there is at least a distance of 51mm between floor and display in the lowest position.
Check whether the lift can make it's full stroke by operating the system up an down completely, and
make sure no cables get stuck.
NAME :
DATE :
SIGNATURE :
27
RISE 2000
DIRECT CONTROL

CHECKLIST

Checklist