Fakir R 2 T Gebrauchsanleitung Seite 10

Fakir - Oil-Filled Electric Radiator R 2 T / R 2 TS / R 2 TSG
Remove the radiator, the feet and the castors from the packaging. Remove any remai-
ning packaging material that might be inside the radiator. Check the radiator for any
damage incurred during transit and check that the mains lead is intact.
Fig. 1
Fig. 3
Putting into operation
The radiator is plugged into a socket with 230 Volt AC. The elegant handle incorpora-
tes the control unit which is operated using rocker switches.
Control lights
When the heater is switched on, the red signal lamps flare on. As soon as the heating-
up is ended and when the pre-set temperature
together with the signal lamps.
Fig. 2
Fig •
is gained, the heater switches off
Fitting the castors
Turn the radiator upside
down an place it on a car-
pet or soft surface to pro-
tect the paintwork.
Attach the fastening
brackets to the radiator
fins and fasten the castor
holders using wing nuts.