MAJORITY Rostock Benutzerhandbuch Seite 9

Product Setup - Connect to Network
EN
Set the time and date
You can now select the time format. Choose the clock time format as per your
preferences, either to [12] or [24] hours. Press the OK button to confirm and move
onto the next step. Next, select which source (DAB/FM/ NETWORK/NO UPDATE) the
unit uses as a source to obtain and update the time and date. If 'Update from
Network' is selected, proceed to the next step and select the time zone. Choose
'Daylight Savings' by setting to [ON] or [OFF].
Connect to your wireless internet network
On the next screen, you can specify whether the product should remain connected to
the network when on Standby Mode. Press LEFT/RIGHT buttons on the radio (Ref.6-
7) or on the ones on remote control to select [YES], and then press the OK button to
confirm.
The Majority Rostock, will now scan for your wireless network, this may take a few
seconds until a list of all the wireless networks available appears on the screen. Select
the WLAN network you would like to connect the radio to, then press the OK button on
the remote or on the radio to confirm. The next screen will show you three options that
you can use to connect the radio to your wireless network by using Push Button
(WPS), PIN (pin code) or 'Skip WPS' based on your router functionality.
Connecting using the WPS (Wi-Fi Protected Setup) button on your router is a quick
and easy way to connect your radio without having to use a password. Select one of
the following two connection methods:
1. Select 'Push Button' if your internet router has WPS button
Select the Push Button on the radio, then press the OK button to confirm. A message
will display on the screen, requesting you to press the WPS button on your router-
press to continue.
PLEASE NOTE: Refer to your router user manual to identify the WPS button, if in
doubt.
Press the OK button to confirm. The Majority Rostock will now connect to your
router. This may take a few seconds.
2. Select 'PIN' if your router can connect using a PIN code number
Select this option on radio menu , then press the OK button to confirm .The radio will
generate an 8-digit code number, which will be displayed on the screen.
Refer to your router user manual to follow the PIN code (WPS) instructions, when
using a pin code number. Enter this code number into the wireless router to connect
with Rostock. Press the OK button to continue.
9