Alarm And Sleep Timer - Majority Rostock Benutzerhandbuch

Alarm & Sleep Timer
EN
Setting the Alarm
The Majority Rostock has two alarms available which you can use and set as per your
preferences.
Press the ALARM button on the remote control (Rem.2) or on the radio press the Sleep
button (Ref.9). The display will show:
Alarm (1 or 2): Off [hh:mm].
Use the UP/DOWN arrow buttons to select either Alarm 1 or Alarm 2, then press the
OK button to begin setting the alarm parameters. Use the ▲ / ▼ buttons to adjust
each setting, and then press OK to confirm.
The alarm settings you can configure include:
Enable: Choose whether the alarm is set to Off, Daily, Once, Weekends, or Weekdays.
Time: Set the alarm time (hh:mm).
Mode: Select the alarm sound source – Buzz, Internet radio, DAB, or FM.
Preset: Choose either the Last Listened station or a Preset station (if applicable).
Volume: Set the alarm volume level (range from 0 to 32).
Save: Once all options are set, select Save and confirm to save the alarm settings.
After setting all parameters, select Save and press the OK button. The display will
confirm with "Alarm Saved". Once set, the alarm icon will appear on the display.
Alarm Snooze
To temporarily turn off the alarm when it sounds, press the OK button to activate the
Snooze function.
Pressing the OK button repeatedly will set a snooze period of 5, 10, 15, or 30 minutes.
The snooze time will appear on the display, and the unit will enter standby mode
during that time.
22