Fm Radio Mode - Majority Rostock Benutzerhandbuch

FM Radio Mode

Position the radio where you have good FM signal and extend the radio antenna in full
to ensure you will receive good FM radio signal.
Press the MODE button on the remote control (Rem.11) or on the radio (Ref.12) to
access Mode Menu. Use the arrow buttons or rotate the 'Navigation/OK' dial on the
radio (Ref.8), to select and press the OK button to switch to FM Radio Mode .
Alternatively, press the FM button on the remote control to switch to FM Mode.
The display will show the frequency. Press the SCAN button on remote control
(Rem.16) to scan for available FM radio stations. Alternatively, enter the FM Menu to
process an Auto presetting scan.
FM Radio Mode – Main Menu
While in FM mode, press the MENU button on the remote control (Rem.6) or on the
radio (Ref.11) to access the FM Radio Menu. A list of sub-menus will appear on the
radio screen, including:
Scan Setting – Enter this option and select YES to scan for stations with a strong
signal, or NO to search for all available stations.
Audio Setting – Choose whether to play in MONO or STEREO.
Auto Presetting – Select and confirm to perform an automatic scan that saves found
stations as presets.
System Settings – Access general radio settings.
Main Menu – Return to the radio mode selection menu.
Manual Scan and Fine Tuning
To fine-tune manually in FM mode:
Press the PREV or NEXT buttons (Rem.7 & 18) once to adjust the frequency by
•
0.05 MHz up or down.
When you find a station, you'd like to save, press and hold the FAV button on
•
the remote control (Rem.10) or on the radio (Ref.5) for 4–5 seconds to open
the 'Save to Preset' list.
Select an empty preset slot, then press OK to save and confirm.
•
To scan more quickly through the FM band:
Press and hold the PREV or NEXT buttons for a few seconds to scan upwards
•
or downwards until a station is found.
To store or recall FM stations on your own list, please follow the instructions
described in detail at page 12.
FM Radio
EN
15