Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.
T E C H N I C A L D E S C R I P T I O N
Your WS 75 is a full electrical wall saw which is only to be used for cutting masonry, stone and concrete
in industrial usage by trained personnel.
Water is absolutely required for cooling the motor and for cooling and for cleaning the saw blade.
The diamond saw blade consists of a prestressed metal disk which is at its circuit fixed with segments made
of a sintered mixture of diamond grains and metal powder.
The sawing process is introduced by dipping the saw blade into the material, which is to be cutted. By
switching the feed direction over, the sawing support moves now along the guide-way to a desired point on
which is once more dipped in, in order to switch over to longitudinal direction for continuing the sawing
process.
3.1
Specifications
Type of machine
Nominal voltage
Nominal current 400V
Nominal current 230V
Nominal power
Power output
Nominal frequency
Speed (full load)
max. cutting depth
Degree of water protection
Weight-motor
Weight-support
Weight-guide-way
Tool fixture-borehole
Tool fixture-pitch circle
max. saw blade diameter
max. feed power-longitudinal feed
max. feed power-dip feed
Guide-way length-standard
Guide-way length-accessories
Cooling water consumption in full load
3.2
Design
The complete sawing unit consists of the sawing support [1] - with rotating swivelling arm [2], which is
responsible for the adjusting movement in cross direction - the detachable saw motor [3] and the two Feed
motors for the dipping- [4] and longitudinal feed [5]. The saw blade [7] is fixed on the working spindle [6] of
the swivelling arm.
On normal sawing works the saw blade is in doing so fixed on the plate flange [8] which is screwed onto
the working spindle with a hexagon head screw [9] M12x25 10.9.
On works in which the saw blade is being guided almost flush along the wall the saw blade is to be fixed
with six hexagon head screws [10] M8x10 on the sawing flange [11].
The complete sawing support is assembled movable on the guide-way [15] with two locking levers [12] over
eccentric axis [13] and pivot bearing [14].
WS 75
V
400V 3P+N+PE
230V 3P+PE
A
10
A
17
W
5,5
W
4
Hz
50 (60)
1/min
1200 (1400)
mm
320
IP 55
kg
17
kg
19
kg
12
mm
25,4
mm
90/6xM8
mm
750
N
2000
N
2000
mm
2180
mm
1090
l/min
1
14
WS 75 H
400V 3P+PE
20
11
9,5
300 (200 - 350)
1500 (1200 -
1800)
320
IP 55
13
19
12
25,4
90/6xM8
750 (800)
2000
2000
2180
1090
1,5
Werbung
Inhaltsverzeichnis
