Failure Display And Inspection - Amzchef Fs-R66S-Poss01C Einrichtung

The ceramic h ob or
a cook ing zone has
tu rned it self off
unexpectedly, a tone
sound s and an erro r
code is displayed
(typi call y alternatin g
with one or two
digit s in th e cook ing
tim er display).

Failure Display and Inspection

If an abnormality comes up, the hob will enter the protective state automatically and display
corresponding protective codes:
Code Possible causes
H Beware of hot surfaces
F Internal communication
E4 Furnace surface thermocouple failure
E8 Relay shorted
E9 NTC1 Sensor open circuit
E5 NTC1 Sensor short circuit
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the ceramic
hob.
English
Techni cal fault.
Measures
It will disappear when the surface has cooled down
to a safe temperature.
Contact the aftersales service.
The hob emits a "B" sound.
Contact the aftersales service.
Please note dow n th e erro r
lett ers and numb ers, swit ch
th e power to the ceramic h ob
off at th e wall , and conta ct a
qua lifi ed techni cian.
88