Listening To Radio; Presetting Stations - Samsung HT-F450 Bedienungsanleitung

Basic Functions
V SURROUND
It is only operational when 2 Channel Audio is playing.
It will change 2 channel Audio Source to 5.1 channel
Sound and there is output.
Each time you press the V-SURROUND button on the
remote control.
Virtual Surround on Virtual Surround off
• Virtual Surround on: change 2 channel audio to
5.1 channel and there is Sound output by 5.1
channel.
• Virtual Surround off: Output of 2 channel Audio is
Sound output by 2 channel. (Original Sound).
TV SOUND
You can listen via Home Theater Speaker or TV Speaker
with TV SOUND button.
1 . Connect the HDMI cable to TV and Home theater.
2 . Press the TV SOUND button on the remote control.
3 . Each time you press the TV SOUND button, TV
SOUND ON/OFF flashes shortly on the Display
part on the Front panel, then change to D.IN.
-TV SOUND ON : Output to Home Theater Speaker.
-TV SOUND OFF : Output to Anynet+ connected TV
Speaker.
Use in this case:
Ğ
1) If you want to listen to the sound via home theater
speaker when you watch a TV.
2) If you want to listen to the sound from the USB media
that plugged to the TV via home theater speaker.
TV SOUND ON/OFF support specification
Ğ
TV Anynet+
Connected
(HDMI-CEC)
TV
Setting
Anynet+
ON
(HDMI-CEC)
supported
OFF
TV
Anynet+
(HDMI-CEC)
No opeartion
supported
TV
Make sure that D.IN function is changed to TV CEC
\
ON state,otherwise ARC audio is not available .
20
|
English
V SURROUND
Using buttons on the Remote Control
1 .
2 .
TV SOUND
Setting Mono/Stereo
Press the MO/ST button.
• Each time the button is pressed, the sound switches
• In a poor reception area, select MONO for a clear,

Presetting Stations

Example : Presetting FM 89.10 in the memory
1 .
2 .
3 .
4 .
5 .
TV TV
Sound Sound
ON OFF
O O
6 .
O O
O O

Listening to Radio

Press the FUNCTION button to select FM.
Tune in to the desired station.
• Preset Tuning 1 : You must first add a desired
frequency as a preset. Press the 5 button to
select PRESET and then press the TUNING/CH
(,.) button to select the preset station.
• Manual Tuning : Press the 5 button to select
MANUAL and then press the TUNING/CH (,.)
button to tune in to a lower or higher frequency.
• Automatic Tuning : Press the 5 button to select
MANUAL and then press and hold the TUNING/
CH (,.) button to automatically search the
band.
between STEREO and MONO.
interference-free broadcast.
Press the FUNCTION button to select FM.
Press the TUNING/CH (,.) button to select
<89.10>.
Press the TUNER MEMORY button.
• Number flashes on the display.
Press the TUNING/CH (,.) buttons to select
preset number.
• You can select between 1 and 15 presets.
Press the TUNER MEMORY button again.
• Press the TUNER MEMORY button before
number disappears from the display.
• Number disappears from the display and the
station is stored in memory.
To preset another station, repeat steps 2 to 5.