Add Camera; Technical Parameters - Kikka Boo Rhen Gebrauchsanweisung

IMPORTANT! KEEP THESE INSTRUCTIONS
EN
FOR FUTURE REFERENCE.
with the parent unit. To connect your baby unit, or connect a new baby unit, follow the procedure below:
NOTE: Camera icon with " √ " means it is well connected. You should select and pair with the camera icon without "
√ " sign.

ADD CAMERA

1. Press the "Menu" key then the menu will pop up.
2. Press the "Left, Right, Up, Down" keys until the camera icon is selected.
3. Press the "OK" key to enter into sub- menu, then press "Up" and "Down" key to select your desired camera.
4. Press the "OK" key to enter into sub- menu; Press "Up" and "Down" key to select icon "Add camera" and then press
"OK" key.
5. When the "Hourglass" icon is displayed on the LCD screen, press the "Pair" button on the back of the camera.
6. Once paired, a successful pairing icon " √ " shows on the LCD screen .
7. If it fails, repeat the above steps .
DELETE CAMERA
1. Press the "Menu" key and the menu will pop up.
2. Press the "Left, Right, Up, Down" keys until the camera icon is selected.
3. Press the "OK" key to enter into sub- menu, then press "Up" and "Down"key to select the camera you want to delete
.
4. Press the "OK" key to enter into sub- menu; Press "Up" and "Down"key to select icon ''Remove camera'' and then
press "OK" key.
5. Press "Down" key to select " √ " icon to delete the camera.
6. Press the "OK" key to confirm the selection.
TEMPERATURE UNIT SETTING
1. Press the "Menu" key then the menu will pop up.
2. Press the "Left, Right, Up, Down" keys until the temperature icon is selected.
3. Press the "OK" key to enter into sub-menu .
4. Press the "Left"and "Right" key to select the F° or C° for setting temperature unit.
5. Press the "OK" key to confirm .
6. Press the "Two-way talk / Exit" key to exit.
NOTE: The detected temperature range is 0~40 C° .
TEMPERATURE ALARM ON/OFF
1. Press the "Left, Right, Up, Down" keys to select the "Temperature alarm" icon for turning on alarm function; Press
the "OK" key to confirm .
2. Press the "Left, Right, Up, Down" keys to select the "Non Temperature alarm" icon for turning off alarm function;
Press the "OK" key to confirm.
HIGH/LOW TEMPERATURE ALARM LIMITS SETTING
1. Press the "Left"and "Right" key to select "High temperature" (red icon) or "Low temperature"(green icon) to change
limit settings.
2. Press the "Up" and "Down" keys to adjust the high limit when the "High temperature" (red icon) is selected.
3. Press the "Up" and "Down" keys to adjust the low limit when "Low temperature" (green icon ) is selected.
NOTE: The High temperature alarm default setting is 36 C°, and the Low temperature alarm by default setting is 8 C°.
When the temperature goes above or below these settings, its icon will display on the screen. It will alert user by a
beep sound. Press any key on the parent unit to stop beeping and flashing.
LULLABY SETTING
You can comfort the baby by playing a gentle lullaby from the camera unit.
1. Press the "Menu" key and the menu will pop up.
2. Press the "Left, Right, Up, Down" keys until the "Lullaby" icon is selected.
ENGLISH
IMPORTANT! KEEP THESE INSTRUCTIONS
EN
FOR FUTURE REFERENCE.
3. Press the "OK" key to enter into sub-menu.
4. Press the "Left, Right, Up, Down" key to select one of the 8 available lullabies, and you can pick single playback, loop
(all 8 lullabies) playback or stop.
5. Press the "OK" key to confirm .
NOTE: The lullaby default setting is OFF.
TIMER SETTING
1. Press the "Menu" key and the menu will pop up.
2. Press the "Left, Right, Up, Down" keys until the alarm icon ''Feeding Timer" is selected.
3. Press the "OK" key enter into sub-menu, Press the "Left, Right, Up, Down" keys to select the alarm time you need.
4. Press the "OK" key to confirm.
5. Press the "Two-way talk / Exit" key to exit.
NOTE 1: The minimum time unit is 0 .5 hour. The maximum time unit is 5 hours (7 options).
NOTE 2: Once the alarm is turned on, the alarm icon will display on the screen.
NOTE 3: The alarm default setting is OFF.
NOTE 4: When the alarm is ringing, press any key on the parent unit to turn the alarm off.
NOTE 5: If you don 't turn off the alarm, the alarm will ring for 1 minute. After three minutes the alarm will ring again
for 1 minute. The alarm will ring for three times in total, after this the alarm stops.
ECO MODE SETTING
This mode allows you to control the sound activation of your baby unit. If there is no sound around the baby unit with-
in 15 seconds, it will stop audio transmission and turn off the screen of the parent unit. When the baby unit detects
any sounds louder than the sensitivity level, it will start transmitting the signal to the parent unit again and turn on
the screen of the parent unit. To change the ECO MODE level, please follow the below instructions .
1. Press the "Menu" key and the menu will pop up.
2 . Press the "Left, Right, Up, Down" keys until the "Eco Mode" icon is selected.
3. Press the "OK" key to enter into sub-menu, then press the "Up"and "Down"keys to select desired level.
4. Press the "OK" key to confirm.
5 . Press the "Two-way talk / Exit" key to exit.
NOTE: There are 3 optional levels - Low sensitivity level, Middle sensitivity level and High sensitivity level.
LANGUAGE SETTING
1. Press the "Menu" key and the menu will pop up.
2. Press the "Left, Right, Up, Down" keys until the ''Language" icon is selected.
3. Press the "OK" key to enter into sub-menu, then press "Left, Right, Up, Down" keys to select the language you need.
4. Press the "OK" key to confirm.
5. Press the "Two-way talk / Exit" key to exit.

TECHNICAL PARAMETERS:

Frequency: 2412MHz~2469MHz;
Power adaptor: Parent unit: Input: 100-240 VAC 50/60 Hz, Output: 5V DC 1A;
Camera unit: Input: 100-240 VAC 50/60 Hz, Output: 5V DC 1A;
Operating Range: Up to 1000ft (300m) outdoor and up to 165ft (50m) indoor;
Display: 5'' Diagonal TFT LCD;
Battery (Parent Unit): Li-ion 3 .7V 4000 mAh (14.8 Wh);
Battery Life: Up to 20 hours;
Maximum Power: <19dBm;
Operation Temperature: 0C°~ 40C° (+32 F~+104 F);
Battery Charging Temperature: 10C°~ 40C° (+50F~+104 F)
Relative Humidity : 15% -85%;
ENGLISH