KIKKA BOO RHEN Gebrauchsanweisung Seite 4

IMPORTANT! KEEP THESE INSTRUCTIONS
EN
FOR FUTURE REFERENCE.
it over in an official waste collecting point. The waste formed from damaged electrical and video devices, batteries,
adaptors, must be disposed of separately. Throwing them out in containers for household waste is forbidden.
Power source: This unit should only be used with the AC power adapters included in this package (rated 5V DC 1A) .
Damage requiring service: This unit should be serviced by qualified personnel only when:
1. Objects have fallen or liquid has been spilled into the product.
2. The units have been exposed to rain .
3. The units do not appear to operate normally or exhibit a distinct change in performance .
4. The units have been dropped or damaged.
SET INCLUDES: Parent unit, baby unit, 2 x power adapters, manual and screw set.
INSTALLATION GUIDELINES
• To use the parent unit and the camera unit together, you have to establish a radio link between them, and the range
will be affected by environmental conditions .
• Any large metal object, like a refrigerator, a mirror, a filling cabinet, metallic doors or reinforced concrete between
the baby and parent unit may block the radio signal.
• The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such
as TV, computers, cordless or mobile phones, fluorescent lights or dimmer switches .
• Use of other 2 .4GHz product, such as wireless networks (Wi- Fi routers), Bluetooth systems, or microwave ovens,
may cause interference with this product, so keep the baby monitor away at least 5ft (1 .5m) from such products, or
turn them off if they cause interferences .
PLACEMENT OF THE BABY MONITOR
• The camera can be placed on the desktop or mounted on the wall. Don 't place the baby monitor on soft quilts or
blankets or in the corners of cupboards, shelves, etc; Keep the baby monitor away from heat sources such as radiators,
chimneys, cookers and direct sunlight; Keep the baby unit away from TV sets, microwave oven and radios. If interfer-
ence occurs, move the camera to elsewhere.
• Place the camera within 6 feet (2 meters) of the area being monitored for optimum performance.
GETTING STARTED
TURN ON THE BABY UNIT:
1. Insert the DC plug of the power adapter into the DC jack on the rear of the baby unit.
2. Insert the other end of the power adapter into a suitable electrical outlet.
TURN ON THE PARENT UNIT:
1. Insert the DC plug of the power adapter into the DC jack on the side of the parent unit.
2. Insert the other end of the power adapter into a suitable electrical outlet.
3. Press and hold the power key on the side of the parent unit for 3 seconds.
4 . Once parent unit is on, the power LED will light up and the image will display on the LCD.
NOTE: Pull the antenna above the monitor up during use to get the best signal.
PAIRING THE CAMERA AND THE PARENT UNIT
1. Make sure the parent unit has power and the baby unit is plugged in.
2. Enter "Camera " on the screen of the parent unit, and choose to add a camera .
3. When the hourglass icon is displayed on the LCD screen, press the "PAIR" button on the back of the baby unit.
NOTE: The camera icon with " √ " means it is well registered.
INFRARED NIGHT VISION (AUTOMATIC)
In a dark room the monitor will display black and white images. In day light, color images will be displayed. For
optimal image quality, ensure the baby unit is positioned 6ft (2m) away from the object.
ENGLISH
IMPORTANT! KEEP THESE INSTRUCTIONS
EN
FOR FUTURE REFERENCE.
ATTENTION:
1. The camera automatically switches to night vision mode, indicated by the icon displayed at the top of the screen.
2. If the screen turns black, it is normal as it indicates that the camera is at the threshold between black and white
images. Try adjusting the mounting position of the baby unit.
PRODUCT OVERVIEW
I. ICONS OVERVIEW:
Signal strength
Alarm
Lullaby
High sensitivity
level
II. PARENT UNIT OVERVIEW:
1. Sound LED bar; 2. Scan / Zoom; 3.Two-way talk / Exit; 4. Menu/OK; 5. Up key ; 6. Right key; 7. Down key; 8.Volume/
Brightness; 9. Charging LED / Power LED; 10. MIC; 11. Left key; 12. 5 " TFT LCD screen ; 13. Antenna; 14. Power key; 15.
Stand; 16. DC-jack; 17. Speaker; 18. Reset key.
III. BABY UNIT OVERVIEW:
1. MIC; 2. Light sensor; 3. Lens; 4. Speaker; 5. Antenna; 6. DC-jack; 7. Pair key; 8. Temperature sensor.
IV. KEY OPERATION
• TURN ON/OFF
Press and hold the power key for 3 seconds to turn on / off the parents unit.
• UP KEY
Press once to tilt the camera up by one step. Press and hold to tilt continuously.
• DOWN KEY
Press once to tilt the camera down by one step. Press and hold to tilt continuously.
• LEFT KEY
Press once to move the camera left by one step. Press and hold to move continuously.
• RIGHT KEY
Press once to move the camera right by one step. Press and hold to move continuously.
• VOLUME/ BRIGHTNESS
Press "Volume / Brightness" key to change them .
Press the "Left"and "Right" key to select the desired volume level from 1~5 .
Press "Up" and "Down" key to select the desired brightness level from 1~5.
(The default brightness level setting is level 3.)
• ZOOM/SCAN
Press "Zoom / Scan" key to view/scan camera. During scan mode, their icon will be displayed on the top of the screen.
Each camera' s video will be displayed on the LCD screen around 10 seconds then it will change to the next camera.
• DIGITAL ZOOM
Under full screen mode, press and hold the "Zoom / Scan" key around 2 seconds to operate zoom in/out.
• TWO-WAY TALK/EXIT
Under full screen mode press and hold "Two-way talk / Exit" key to enter this mode. A microphone icon will be
displayed in the corner of the LCD screen. Release the key to stop.
V. MENU OPERATION
PAIRING THE CAMERA AND PARENT UNITS
The baby unit is connected to your parent unit. You do not need to connect it again unless the baby unit loses its link
Volume Zoom
Camera Two-way talk
Night vision Battery level
Middle sensitivity Low sensitivity
level level
ENGLISH