Dismantling And Assembling Hook Race; Cleaning The Feed Dogs - Blaupunkt CASUAL 845 Bedienungsanleitung

When caring for your machine, cleaning, removing the thread or any other function please make sure that the power is switched When caring for your machine, cleaning, removing the thread or any other function please make sure that the power is switched off and the When caring for your machine, cleaning, removing the thread or any other function please make sure that the power is switched

Dismantling and Assembling hook race

To dismantle hook race:
Raise the needle to its highest position and open Raise the needle to its highest position and open
the hook cover.
Open the hinged latch of the bobbin case and
remove it from its position
To assemble the hook race:
Hold the hook by the center pin and fit it carefully back to the hook race, Hold the hook by the center pin and fit it carefully back to the hook race,
forming a perfect circle with shuttle driver. Attach the hook race ring making forming a perfect circle with shuttle driver. Attach the hook race ring making
sure bottom pin fits into the notch. Lock the hook race ring by turning the bottom pin fits into the notch. Lock the hook race ring by turning the
holders back into position. Insert the bobbin case. Thread the bobbin and holders back into position. Insert the bobbin case. Thread the bobbin and
machine, reconnect the power, switch on the machine and you are ready to machine, reconnect the power, switch on the machine and you are ready to
sew.
machine is unplugged!
Cleaning the machine
Disconnect your machine from
the power source. Open the
hook race ring holders and
remove the hook race ring.
Remove the hook.

Cleaning the Feed Dogs

Fitted in the machine Fitted in the machine
Remove the needle and the
presser foot. Unscrew the
needle plate set screws and
remove the needle plate.
NOTE: It is easier if you lay the machine on its back to replace the race.
43
Disconnect your machine from the power Disconnect your machine from the power
Oil with one
drop of oil
Clean the hook race with a Clean the hook race with a
brush and a soft dry cloth soft dry cloth .
W ith a brush, clean out dust and ith a brush, clean out dust and
lint clogging on the feed dog lint clogging on the feed dog
teeth. Replace the needle plate teeth. Replace the needle plate
and tighten the screws. and tighten the screws.
he machine on its back to replace the race.
source
EN