Connecting The Machine To The Power Supply; Foot Control; Sewing Light - Blaupunkt CASUAL 845 Bedienungsanleitung

Connecting the Machine to the Power Supply

Before connecting the machine to the power supply, make sure
that the voltage and frequency of your electricity matches that of
the machine.
Fit the non-reversible plug into the cord socket and plug the
machine into the power supply.
GETTING READY TO SEW

Foot Control

Sewing speed can be varied by
the foot control.
The harder you press on the
control, the faster the machine
runs.
29

Sewing Light

(For E14 bilb only)
(A)
The sewing light is located behind the
face plate.
Turn the screw counter-clockwise and
remove the face plate.
•
To remove..... Turn to the left
(A)
•
To replace.... Turn to the right.
EN