Samsung SNC-B2315P Bedienungsanleitung Seite 33

You can't change the port numbers of Device, TCP, UDP, Upload and Multicast,
which are automatically changed according to the increase/decrease of the port
number of HTTP.
4
In the <PORT>fields, set up port numbers.
<HTTP Port>: A HTTP port used to connect
to a camera using the Internet
browser. The default value is 80.
The HPPT port value can be
changed by using the up/down
button to the right.
The HTTP port number starts
with 80 and increases/decreases
to 10000, 10006, 10012...
<Device Port>: A port used to control video
transmission. The default value
is 60001(TCP).
<TCP Port>: A port used to transfer video using TCP protocol. The default value is 60002(TCP).
<UDP Port>: A port used to transfer video using UDP protocol. The default value is 60003(UDP).
<Upload Port>: A port used to upgrade software. The default value is 60004(TCP).
<Multicast Port>: Shows UDP port set for video transmission using UDP Multicast. The default value is
5
Enter your password.
The default password is "4321".
The password is the camera login password of the root user.
6
Click the [OK] button.
The manual network setting is finished.
7
The camera is set to the manually entered IP and is restarted.
60005(UDP).
5 6
Setting Static IP
4
_29