Connecting The Camera Directly To A Dhcp-Based Xdsl/Cable Modem - Samsung SNC-B2315P Bedienungsanleitung

CONNECTING ThE CAmERA dIRECTly TO A dhCP-bASEd
XdSl/CAblE mOdEm
This is enabled for a modem using DHCP.
Setting the IP Router
1
Set the IP address referring to "Static IP Setting" on page 28 or "Dynamic IP Setting" on page 32.
2
Launch an Internet browser on the local PC connected to the IP Router.
3
Enter the IP Router's address in the address bar of the browser.
ex) http://192.168.1.1 ,http://192.168.0.1 or http://192.168.xxx.1
For the address of the IP router, refer to the product's documentation.
4
When the IP Router is connected, the login window appears and prompts you to enter the password.
For the login IP and the password, refer to the IP router's documentation.
5
When done, you will see the setup window of the IP router. In the setup menu, select "Automatic
Configuration-DHCP" for Internet Connection Type.
For the menu location of Internet Connection Type or DHCP selection, refer to the IP router's
documentation.
6
When done, click the [Save] or [Apply] button to save the settings.
SNC-B2315
24_
Network Connection & Setup
xDSL or Cable Modem
DDNS Server
(Data Center, KOREA)
External Remote PC