DUROFIX RG6020-180 Bedienungsanleitung Seite 16

1English1
A
C
D
B
5
Fig. 4
Mounting Grinding Discs / Cutting Discs
To fit a cutting disc, proceed as follows:
1. Make sure the grinder spindle is at standstill.
2. Locate the backing nut onto the machines spindle.
3. Locate the disc against the lock plate.
4. Screw the flange onto the spindle.
5. Push the spindle lock button to lock the spindle and tighten the flange with the
two-pin wrench supplied.
English -15