Create Netbot LS50 Bedienungsanleitung Seite 14

• We recommend disconnecting the appliance from the power supply when you are away
from home to prevent it from being switched on accidentally while you are away.
Download the app and configure Wi-Fi
1. Scan the QR code to download and install the app on your device.
2. Open the app and log in if you have an account. If you don't have one, select "New User"
to register and log in.
3. Make sure you are connected to your Wi-Fi network. Some routers offer two default net-
works: 5G and 2.4G. If so, connect via the 2.4G network as 5G networks are not supported.
4. Turn on your robot vacuum and in the app, click the "Add a device" button and select the
family corresponding to your robot vacuum.
5. Press the power button
ton lights will flash and the robot will enter the waiting state for connection.
6. In the app, press "Next."
7. Go to your phone settings, select the Robot's temporary wifi (Smartlife-XXXX) and return
to the CREATE APP.
8. Wait for your robot vacuum to finish pairing and hear the message "Network connection
succeeded."
9. Click Finish and start enjoying your robot vacuum.
Reset WiFi
• At the same time, press and hold the power button for 3 seconds.
, you will hear the voice message "WIFI has been reset". The power button lights will flash
and the robot will enter standby mode for connection.
• Once the connection is complete, the white lights on the power button will remain solid.
E NGL I SH
14
INSTALLATION AND USE OF THE APP
• The CREATE HOME app is available for both Android and iOS
(search for the app on Google Play or the App Store or scan the QR
code). Depending on the provider, there may be costs involved in
downloading the app.
• With the app you can control the device through your home network.
A prerequisite is a permanent Wi-Fi connection to your router and
the free CREATE HOME app.
and the load button at the same time and the power but-
and the load button