Cleaning And Maintenance - Create Netbot Ls50 Bedienungsanleitung

Using the water tank
• Fill the tank with water, place the mop in the tank, attach the tank to the robot vacuum, and
press the power button to start working.
• Do not use the mop function on carpets or rugs. Once the mop function is complete, empty
the water tank and remove the mop from the tank.
Cleaning the sensors
• It is recommended to clean the laser sensor, the charging contacts on the vacuum cleaner
and charging base, the signal transmission area of the charging base, and the drop sensors
at least once a month.
• Clean them with a soft cloth, do not use any type of cleaning product.
Battery
• The robot vacuum cleaner has a built-in high-performance rechargeable lithium battery.
In order to maintain battery performance, please keep the robot vacuum charged during
daily use.
• If the robot is not used for a long time, turn it off and store it. Charge it at least once every
three months to avoid excessive battery damage.
Main brush
It is recommended to clean the main brush once a week.
1. Turn the robot vacuum over and press the buckles on the main
brush cover to remove the cover.
2. Remove the main brush.
Side brush
It is recommended to clean the side brush once a week.
1. Turn the robot vacuum over and pull out the side brush vertically.
2. Remove tangled hair and dirt and reinstall.
3. It is recommended to replace the side brush every 3 months to
ensure optimal cleaning.
E NGL I SH
12

CLEANING AND MAINTENANCE

3. Use the cleaning brush to remove dust from the brush and main
brush cavity, then remove tangles from the main brush.