Herunterladen Diese Seite drucken

Sebo automatic XP3 Kurzanleitung Seite 3

Vorschau ausblenden Andere Handbücher für automatic XP3:
a
b
c
d
41
41
18
23
Die automatischen
Universalstaubsaugers
von vier Leuchtanzeigen
überwachen.
Die Automatik mißt die Leistung der Bürste
und stellt über eine Stellrolle (41) immmer die
optimale Höhe ein. Zwei grüne Anzeigen
(a, b) zeigen dies an.
Steht das Gerät in der aufrechten Position,
hebt sich die Bürste vom Boden ab, wie die
grüne Anzeige „b" zeigt. 1stdies nicht mög-
lich, Z.B. auf hochflorigem Teppich, blinkt die
rote Anzeige „c", bis die Bürste manuetl
angehoben
wird.
Wenn das Gerät abschaltet
Anzeige „q" blinkt, ist die Bürste blockiert
Odereine Überlast registriertworden (Über-
prüfen
Leuchtet die rote Anzeige „c" dauernd,
die Bürste erneuert werden (siehe Bürste ent-
nehmen ).
Falls die rote Anzeige „d" dauernd
muß entweder die Filtertüte gewechselt
werden Oder das Gerät ist verstopft (Siehe
Verstopfungen
tung schaltet
Anzeige „d" blinkt.
Das Rastpedal (18) drücken, um das Gerät
zu schwenken.
Schieber (19) ist eine weitere Rastposition
zur Uberwindung
Teppichkanten
erneut
auslösen,
s
schwenken.
Zur Benutzung des Teleskopschlauchs (23)
das Gerät in die aufrechte
Dann das Saugrohr nach oben herausziehen
und den Schlauch spannen, bis er einrastet.
19
Zum Zurückstecken
das Gelenk (20) einführen und es dann mit
dem Griff auf den Nocken (24) am Filterge-
häuse stecken. Der Schlauch gleitet dann
zurück und kann auch ohne das Saugrohr
benutzt werden. Die Saugdüsen (16, 17) pas-
sen auf das Saugrohr und den Schlauch.
ACHTUNG
Hinweis
Die Bürste im Gerätefuß (9) Wird nur ange-
hoben,
wenn
Position
eingerastet
die Unterlage.
Die Bürste
läuft immer
rechtem
Gerät. Vorsicht
sen, Anschlußleitungen
Sie immer darauf, daß Teppichkanten
-ecken nicht von der Bürste eingezogen
werden.
Lose gewebte,
sehr weiche
Bodenbeläge
empfindlicher
Saugrohr und einer der Saugdüsen aus
dem SEBO Zubehör
Auf unebenen
dem Bodenb'ech
Das Gerät über hohe Schwellen tragen.
Funktionen
Ihres
SEBO
können Sie anhand
auf dem Gerätefuß
und die rote
muB
leuchtet,
beseitigen
Bei Nichtbeach-
das Gerät ab und die rote
Mit dem orangefarbenen
von Hindernissen und
einstellbar. Das Pedal dann
um flach auf den Boden
zu
Position
stellen.
das Teleskoprohr erst in
zum Gebrauch:
das Gerät
in der aufrechten
ist, sonst bürstet
sie
mit, auch bei auf-
bei Teppichfran-
usw. Bitte achten
und
extrem
langflorige
Oder
sowie Böden mit
Oberfäche
bitte mit dem
reinigen.
Böden
ist der Kontakt
mit
möglich.
The machine has an information display on
the power head with four lights to monitor the
automatic
functions.
The two green lights (a, b) indicate the brush
adjustments
of the Active Height Control sytem.
The power head maintains the optimum brush
height continuously
by activating the adjustment
wheel (41). The lights will flash intermittently
the machine
is moved
over
the floor.
machine is clicked into the upright position the
brush head automatically
lifts from the floor.
The two red lights (c, d) are warning lights.
If red light "d" is shining continously, the bag is
full, the filters require replacement, or there is a
blockage. When the light is flashing the machine
has shut off to prevent overheating
If red light "c"is on continously the brush is
worn out. When the light flashes and the
machine has stopped, then the machine has
shut off because of a jammed brush or to
prevent carpet damage.
If the red light „c" flashes when using the hose
with the machine in the upright position, then it
is warning that the brush is making contact with
the floor. Avoid tilting the brush head on to the
floor when using the hose.
To release the machine from the upright posi-
tion, press the foot pedal (18) down. With the
orange slider (19) an intermediate
on can
be added
to lift the brush
cles. Then to lower the machine
zontal position, press the foot pedal again.
To use the telescopic hose system (23), put the
machine into the upright position, then lift the
tube from the machine
and stretch
until
it locks.
When
the tube
is returned
machine, insure it is pushed down over the
projection (24) on the housing. The hose can be
used on its own when the tube is fitted to the
housing. The attachments (16, 17) fit either to
the end
of the hose
or the end of the tube.
CAUTION:
Upright
vacuum cleaners
are fitted with
rotating
brushes which can cause damage
the machine
is used incorrectly
propriate
floor surfaces.
Do not run the brush head over rug/carpet
fringes.
Do not stand the machine over rug/carpet
edges.
Do not
tilt
the
brush
head
on to the
when
using
the hose.
This can cause
king.
Ensure the machine
is upright
the
hose.
For floor coverings
and rugs which are un-
suitable for uprights
use the attachment
with
appropriate
SEBO attachments.
may also be necessary
on uneven hard
floors.
On uneven
hard floors
prevent
contact
between
the floor
bottom
plate.
Never
run over
the
cable
with
as
When
the
stop positi-
over
obsta-
to the hori-
out the hose
to the
if
or on inap-
floor
mar-
when using
tube
This
take
care to
and the
the
brush
loading