REDCAT RER17042 Bedienungsanleitung, Kurzanleitung Seite 20

GYRO
RCR-2CENR RADIO SYSTEM
Receiver Connection (Input Signal Mode)
* PWM (50-333Hz)
Suitable for most RC radio systems. When the gain wire is plugged into the receiver, sensitivity can be adjusted from the transmitter.
When the gain wire is not plugged into the receiver, the gyro's potentiometer can be used for gain adjustment.
Note: The RDS RTR does not use the gain adjustment wire. See the "Function Switch" section for gain adjustment.
Wiring Diagram
Gain Wire
not used
TM
19