Basic Parameters - Moza Racing R16 Benutzerhandbuch

Basic Parameters

Installation
Attach the wheel base to the simulator bracket through the 4 threaded holes on
•
the bottom.
Connect the power cord and the TYPE-B end of the USB cable into the
•
corresponding ports on the rear of the R1. Turn on the power supply and connect
the TYPE-A end of the USB cable to the PC.
Short press the power button on the rear of the wheel base. (short press to turn
•
on, long press to turn off).
Download and install the MOZA Pit House software from the help center of
•
MOZA Racing's official website (WWW.MOZARACING.COM). Start your racing
journey with the wheel base.
For more information and instructional videos, please visit the official website
•
(MOZARACING.COM)
Caution and Warnings
To avoid fire/electric shock it is forbidden to expose the equipment to rain and or
•
damp environments.
It is strictly forbidden to use the equipment in direct sunlight.
•
Recommended indoor temperature: 15°C ~ 30°C.
•
For your safety and well-being, please monitor your gaming time and take breaks
•
as needed.
It is recommended for new users to limit force feedback to less than 50.
•
The device is not suitable for children under 6 years old, small accessories may
•
cause a choking hazard!
4