Additional Safety Rules; Wet Vacuuming; Dry Vacuuming; Blower Function - Trend T35 Übersetzung Der Originalanleitung

ADDITIONAL SAFETY RULES

WARNING: This appliance contains harmful
dust. The emptying and maintenance,
including the removal of the collection bag,
may only be executed by trained personnel wearing
suitable protection equipment. Do not switch on until
the complete filter system has been installed. Otherwise
there is danger to your own health.
DO NOT pick up anything that is burning or smoking,
such as hot ashes, matches or cigarettes.
DO NOT use to vacuum combustible explosive
materials, such as grain, coal or other finely divided
combustible material.
DO NOT use to vacuum hazardous, toxic or
carcinogenic materials, such as asbestos or pesticide.
Never pick up explosive liquids (e.g. paint thinner,
gasoline, diesel fuel, heating oil etc.), acids or solvents.
DO NOT use vacuum without filters in place, except
as explained in the "Wet Vacuuming" section of this
manual.
Some woods contain preservatives which can be toxic.
Take extra care to prevent inhalation and skin contact
when working with these materials. Request and follow
any safety information available from the supplier of the
materials.
DO NOT use dust extractor as a seat, ladder or
stepladder.
DO NOT place heavy objects on dust extractor.
DO NOT hang the dust extractor eg for transporting
purposes.
Wear Personal Protective Equipment (PPE). Ear, eye
and respiratory protection must be worn.
USE
The requirements for the ingress degree (dust category
M) have only been proven for dry vacuuming.
• Be sure that switch is in off position (0) OFF and
connect the machine to a suitable socket.

DRY VACUUMING

Class M vacuum cleaners are suitable to vacuum dry,
non-combustible dusts with workplace limit values of ≥
0,1 mg/m .
3
Inserting the filters: (Fig. 7)
(A) Paper bag .
EN - T35
(B) Cartridge Filter .
(C) Filter in polyurethane foam (only for wet & dry
models)

WET VACUUMING

For wet & dry models, before cleaning up liquids, make
sure that the paper bag (A) and the cartridge filter (B)
have been removed.
Inserting the filter: (Fig. 8)
(C) Filter in polyurethane foam (only for wet & dry
models)
• The machine must be always kept on horizontal
bases, in a safe and stable way.
• Insert the suitable filters for the proper use.
• Never use the appliance without filters .
• Use the most suitable accessories for the requested
usage.
• Put switch on (-) ON position in order to start the
machine.
NOTE: An adequate ventilation rate (dust category
class M) must be provided for when the outgoing air is
circulated.
WARNING:
DO NOT connect power tools to outlet(when using the
vacuum for wet pick up.
NOTE: Plug dust extractor into residual current device
(RCD) protected outlet when using it for wet pick up.
• When job is over, switch off (0) OFF and keep away
the plug from the socket.

BLOWER FUNCTION

CAUTION: function not usable if the appliance is used
to dry vacuum harmful dust.
The appliance can also be used as a blower: remove
the air outlet grid 10 by pressing gently on the closure
tab, remove the hose from the inlet 3 and then insert
the bayonet cap of the hose into the blower outlet
situated inside the lid, behind the air outlet grid, as
shown in Fig. 4.
• When job is over, switch off (0) OFF and keep away
the plug from the socket.
START UP
(0) OFF, SWITCH OFF
(I) ON, MANUALLY OPERATED: VACUUMING
AUTOMATICALLY OPERATED WITH
CONNECTING ELECTRIC POWER TOOL TO
SOCKET - SOCKET FOR TOOLS MAX. 2300W
-8-