VEVOR R5 Benutzerhandbuch Seite 5

ASSEMBLY STEP
Assembly steps of suction pool cleaner
The Pool Cleaner Body is shipped as one piece, making cleaner assembly a
simple and quick process.
Hose Assembly
For best results and to maintain
proper operation, use only original
parts and hoses.
1. To connect the hose sections,
wet the ends in the pool water,
then twist and push the female
ends onto the male ends.
2. Connect the Female-Female
hose to the cleaner swivel. See
Figure 3.
3. The hose should reach from
where the cleaner is connected to
the farthest point of the pool, plus
one section and the
Female-Female hose.
4. Install the hose float onto the
hose.The float should be placed
(50-70 centimeters) above the
cleaner. See Figure 4.
4