Corrective Action - Vevor R5 Benutzerhandbuch

2. Stretch the bottom of the tire over the bottom of the wheel. Be sure that the
back lip of the tire is resting flat on the inside edge of the wheel.
3. Fold the back lip of the tire onto the back of the cleaner wheel along the entire
cleaner wheel. The tire should lie flat on the top surface of the wheel.
Because of the individual characteristics of your pool, some additional adjustments
may be required to get the best performance from your Pool Cleaner. Use the
following information to resolve possible issues.
PROBLEM
Cleaner is not
moving or is
moving too
slowly.
Cleaner's
right wheel
will not turn
when rotated
by hand.
TROUBLESHOOTING
1. Check the flow with flow gauge or by calculating the
cleaner RPM and adjust the flow if necessary using the
regulator valve. See page 5.
2. Check for debris inside the cleaner itself. See page 7.
3. Check to be sure the pump has primed. Check for leaks in
the system that may prevent proper priming.
4. There may not be enough flow through the system. The
filter may need back washing.
5. Check to be sure that the main drain and all suction lines
are closed, except for the suction line to which the cleaner is
attached.
6. Check for obstructions in the system (e.g. debris in the
filter, pump basket or pump impeller).
7. Pool pump and filter system may be too small to provide
proper water flow. Consult your pool professional.
Check for obstructions inside the cleaner itself. See page 7.

CORRECTIVE ACTION

15