Charge The Camera; Charging Indicator - Reolink Go Ranger Pt Schnellstartanleitung

NOTE: You may also run into the following situations:
Voice Prompt
"SIM card cannot be Camera cannot recognize
1
recognized"
"The SIM card is locked
2
with a PIN. Your SIM card has a PIN.
Please disable it"
"Not registered on
network. Please activate Camera fails to register to
3
your SIM cardand check the operator network.
the signal strength"
"Network connection Camera fails to connect
4
failed"
"Data call failed. Please
The SIM card has run out
confirm your cellular data
5
of data or APN settings
plan is available or import
the APN settings"
9 English
Camera Status Solutions
1. Check if the SIM card is facing
the reverse direction.
Devices Cloud
Devices Cloud
this SIM card.
2. Check if the SIM card is not fully
inserted and insert it again
Put the SIM card into your mobile
phone and disable the PIN.
You haven't added any device. Please click
You haven't added any device. Please click
the"+"button in the top right corner to add
the"+"button in the top right corner to add
1. Check whether your card is
activated or not. If not, please call
your operator to activate the SIM
card.
2. The signal is weak at the current
position. Please move the camera
to a location with better signal.
3. Check if you are using the
correctversion of the camera.
The camera will be in Standby
to the server. mode and reconnect later.
1. Please check whether the
data plan for the SIM card
is still available.
are not correct. 2. Import the correct APN
settings to the camera.

Charge the Camera

It's recommended to fully charge the camera before installing it.
Charge the camera with a 5V power adapter
(not included).

Charging Indicator:

Orange LED: Charging Green LED: Fully charged
For better weatherproof performance, please
always cover the charging port with the
rubber plug after charging the camera.
Charge the camera with the Reolink Solar
Panel
English 10