Timbertech KEBO01 Original Bedienungsanleitung Seite 31

Addition:
• Movable parts can be touched. Turn off the machine and unplug it when exchanging parts
or setting it. Please check the inset for core drilling before use. Distorted or damaged
insets must not be used.
• Use only the recommended cutting tools, because the use of non-recommeded cutting
tools can, through a loss of control, lead to injuries. Use only core drilling parts that were
designed for this machine (pay attention to the diameter and length of the drill bit!).
• Incorrect clamping and positioning of the drill bit parts can, through broken or thrown
drill parts, lead to dangerous situations. Make sure to assemble and position the core
drilling parts strictly in accordance to the instructions as listed in this manual.
• Never use the electrical appliance without the provided PRCD.
• Keep off water from electric parts and people in the workspace.
Residual risk
Also when this power tool is used properly, the residual risks remain present. The following damages
can occur in connection with the construction and performance of the power tool.
Injuries and property damage, can be caused by flying parts of suddenly broken tool heads.
Warning!
This power tool creates while in operation, an electromagnetic field. This field
can under certain conditions can affect active or passive medical implants. To
reduce the dangers of serious or deadly injuries, we recommend that persons
with a medical implant consult with a doctor or the manufacture of the implant,
before using this power tool.
DE FR EN ES EN
31