CODE HOMME ACT928823569 Bedienungsanleitung Seite 4

GENERAL FEATURES
Please read these instructions carefully before using this product
and keep them in a safe place for future reference.
1. Shaver blade
2. On/Off button
3. Charging area
4. Cleaning Brush
5. Limit combs (1 / 2 / 4 / 6mm)
6. Charging cable
IN THE BOX
This packaging should contain:
• Rechargeable face shaver, USB charging cable, cleaning brush and 4 limit
combs (1 / 2 / 4 / 6mm).
• User manual, read these instructions before use.
USE
What to do before fi rst use:
• Remove the packaging material and inspect the device for damage.
• Do not operate the device if it is damaged in any way. Return it to your seller immediately.
• Never expose the appliance to temperatures below -10°C or higher than +40°C for long periods of time.
• In order to get an ideal cutting effect, check all accessories of product, as well as clean and maintain the
product.
INTENDED USE
• Warning! Only use the device externally.
• The appliance is only intended for human hair.
• Any incorrect use can be dangerous!
• The hair must be clean when being cut.
• Only shave small areas at one time.
• The cutting head will jam if you try to work too quickly or try to cut too much hair at once.
• Let the appliance run for a short time before starting to cut.
USING THE APPLIANCE
• Attach the accessory which is to be used in the appliance.
• Turn on the appliance. To turn on the appliance press the switch On / Off. Hold the appliance in your palm with an angle
perpendicular to the plane of the skin (90°). There is no need to apply much pressure on the appliance.
• Just let the appliance touch the surface of your skin gently.
ASSEMBLING THE GUIDE COMBS
1. Choose the desired guide comb to trim hair evenly to a length of 1, 2, 4 or 6 mm. The length is indicated on the combs.
2. Click on the comb with the desired millimeter size, by using your thumb to fi rmly clamp the comb on the appliance.
DISASSEMBLING THE COMB
1. To remove or replace the comb, remove the attached comb by using your thumb to push the comb upwards.
2. Click the new desired limit comb on the appliance.
SHAPING A BEARD AND SHAVING THE BACK OF THE NECK WITHOUT THE ATTACHMENT
1. Remove the attachment.
2. Draw the cutting head at a shallow angle along the skin without applying pressure.
CLEANING AND MAINTENANCE
• Turn off your appliance and wait until it is completely cool. Before cleaning, remove the accessory and the used blade and clean
with the aid of the cleaning brush that was fitted in the product.
5
4
6
4
1
2
3