E) Equalizer; F) Bluetooth - Renkforce RF-TB500WW Bedienungsanleitung

e) Equalizer

Press one of the equalizer buttons MOVIE / TV / SPORTS / DFLT (23) or press the EQ (3) button to set the desired
EQ setting.
MOVIE
Suitable for films, series
TV Suitable for news, reports, interviews, etc.
SPORT
Suitable for sports programs
DFLT
Default setting

f) Bluetooth

If this is the first time you are using your Bluetooth-enabled device with the soundbar, both devices must be paired.
After pairing, the soundbar will recognize your Bluetooth device automatically when Bluetooth mode is activated.
Please note that it may take several seconds for the connection to be established. If no connection is established
within 2 minutes, the soundbar will switch to the previously connected audio source.
The transmission range is approximately 8 m in direct visibility. Objects placed between the Bluetooth
devices may reduce the transmission range.
Check the technical specifications of your Bluetooth device before pairing. Compatibility is not guaranteed
with all devices.
Some wireless devices require you to enter a password when pairing. In this case, enter "0000".
If the Bluetooth signal is weak, the connection to the soundbar may be lost. The connection will be
automatically restored once the signal strength improves.
Proceed as follows to establish a Bluetooth connection:
• Turn the soundbar on.
• Press the SOURCE button (2, 19) repeatedly to switch on Bluetooth mode. The Bluetooth indicator (8) flashes
slowly. The soundbar is now in pairing mode.
• Activate Bluetooth on your mobile device (e.g. smartphone) and scan for Bluetooth devices. The soundbar appears
on the display of your mobile device with the name "renkforce TB500WW".
If the name of the soundbar does not appear on your mobile device, press the BT PAIR (22) on the remote
control or press and hold the PAIR (4) button on the soundbar. The soundbar emits the audible message
"Pairing" (establishing a connection) and the Bluetooth indicator flashes quickly.
• Select "renkforce TB500WW" to pair the devices. The soundbar emits the audible message "Paired" (connection
established) in confirmation and the Bluetooth indicator is lit solid.
• You can now start playback on your mobile device.
41