be cool BC18ST2505 Bedienungsanleitung Seite 177

Press the "SPEED" button on the remote control or on the control panel to
set the speed. The currently selected speed is shown on the display (F1, F2,
F3)
•
Oscillation button
Press the "Oscillation" button
control supplied to activate oscillation. Press the button again to stop
oscillation.
•
TIMER button
You can use the "TIMER" button
increments up to a maximum of 12 hours.
Press the "TIMER" button on the remote control or on the control panel. The
display starts to flash and you can set the desired time by pressing the
"TIMER" buttons again.
Once you have set the desired time, please wait for about 5 seconds. The
display then switches back to the set speed level and the timer setting is
accepted.
•
Mode button
Press the "Mode" button to switch between normal wind, natural wind and
sleep wind modes. The selected setting is shown on the display.
Natural wind mode
The natural wind mode simulates a natural air flow generated by changing
speeds. The wind strength varies between stronger and weaker gusts of air,
similar to a light breeze outdoors. This dynamic change in wind speed
creates a pleasant and natural feeling that is less uniform and constant than
the normal mode.
Sleep mode Mode
on the control panel or on the remote
to set the operating time in 1-hour
177