VTech V-Hush Rocker Schnellstartanleitung Seite 5

2
Installing the rocker
Caution
• Keep the Rocker out of reach of your baby. Never place the
Rocker inside the baby's cot or playpen.
Note
NOTE NOTES
• For your convenience, this product is supplied with a spare
clamp to avoid the need to remove and reinstall from one
pushchair to another.
(Optional) Changing rubber pads
to fit your stroller:
1. The pre-fitted rubber pads fit stroller
handlebar diameters from 26 to 33
millimetres. For larger handlebars, use
the larger pads for 34 to 41 millimetres.
2. When changing the rubber pads, look
for the marking "A" on the rubber pad.
Make sure to match this marking with the
mounting bracket during installation.
3. Remove the pre-fitted rubber pads and
insert the new rubber pads, ensuring
that marking "A" is aligned.
Install Rocker onto the stroller:
1. Find a convenient area
away from a wall and
secure your stroller with
the brakes. Turn the
knob anti-clockwise to
unscrew the mounting
bracket.
2. Clamp the mounting bracket to the
stroller handlebar, and turn the knob
clockwise until it locks firmly.
Note
NOTE NOTES
• Remember to keep a firm grip or the
rocker can fall off.
Pre-fitted
rubber
pads (x 2)
3. Align the markings on both com-
ponents and position the Rocker's
mounting slots over the two bracket
tangs. Slide it down until it locks firmly
in place. Rotate the Rocker until it is in
a vertical position with the nightlight
downwards.
4. Note that the rocking movement is
horizontal, so positioning Rocker ver-
tically, ensures optimal performance.
5
Scan to see a
video showing
the complete
installation.
Larger rubber
pads (x 2)