1
Connect and charge the rocker
Notes
NOTES
NOTE
• The rechargeable battery in the Rocker is built-in.
• Only use the power adaptor supplied with this product.
• Make sure the Rocker is not connected to an electronically/timer-controlled electric
power outlet.
• Connect the power adaptor in a vertical or floor mount position only. The adaptor prongs
are not designed to hold the weight of the Rocker.
• Make sure the Rocker and the power adaptor cord are out of reach of children.
Lift and rotate the rubber cap
to allow the power adaptor
connector to be inserted, connect
the power adaptor to the Rocker
and a power supply, then it
charges automatically.
Notes
NOTE
NOTES
• Before using the Rocker for the first time,
charge the battery a minimum of 4 hours.
• The Rocker can work up to 6 hours at the
lowest rocking speed. The standby time
between uses will depend on the battery
charge available. This varies according to the
rocking speed, night light use, lullaby use and
the age of the battery.
• The Rocker will stay off while charging, which
is normal.
The LEDs indicate the battery status during charging as shown in the table:
Battery Charging
status
< 20%
< 40%
< 60%
< 80%
< 100%
Fully charged
L1 LED indicator flashes.
L1 indicator turns on steadily, L2 flashes.
L1 and L2 indicators turn on steadily, L3 flashes.
L1, L2 and L3 indicators turn on steadily, Timer 30 indicator flashes.
L1, L2, L3 and Timer 30 indicators turn on steadily, and Timer 60 indicator
flashes.
All LED indicators turn on steadily.
LED indicators
4