Beko RHO 8323 BT Benutzerhandbuch Seite 11

3 Assembly instructions
1. Turn the body of the electric heater up-
side down with the bottom facing up.
2. As shown in Figure 1, Align the instal-
lation slot of one foot assembly betwe-
en the second and third fins, and then
press down to clip it in; Align the instal-
lation slot of the other foot assembly
between the Second to last and third
to last fins, and then press down to clip
it in.
Figure 1
3. After the installation is firm as Figure
2, It is OK after you check, to put the
electric heater right and the wheel can
touch the ground.
Figure 2
Oil Filled Heater / User Manual
control
box
11 / EN